Measurements; Area Measurement; Volume Measurement - TESTBOY TV 610 Bedienungsanleitung

Measurements

Range finding
Make sure that the target laser is switched on. If it is not switched on, press the (G)
uring button.
Make sure that you have selected the correct reference point (de-
pending on the target point) and home in on the object to be meas-
ured with the target laser.
Press the (G) measuring button. Given a correct measurement, an
acknowledgement tone will sound; the target laser will be switched
off and the measurement result will be shown on the display.
The basic setting of the measuring unit is metres (m).

Area measurement

Press the (H) button when the measuring instrument is switched on. A perspective sur-
face will be shown on the left-hand side of the display.
Perform a length-wise measurement (flashing bar).
The measurement result is displayed in the upper-most row.
Perform a width measurement (flashing bar).
The measurement result is displayed in the second row.
After measuring the length and width, the calculated surface is
displayed in the lowest row.

Volume measurement

Press the (H) button twice when the measuring instrument is switched on. A perspective
cuboid will be shown on the left-hand side of the display.
Perform a length-wise measurement (flashing bar).
The measurement result is displayed in the upper-most row.
Perform a width measurement (flashing bar).
The measurement result is displayed in the second row.
Perform a measurement of the height (flashing bar).
The measurement result is displayed in the third row.
After measuring the length, width and height, the calculated room
volume is displayed in the lowest row.
TV 610
Operation
meas-
21