Getting Connected - NETGEAR AirCard 790 Kurzanleitung

Getting Connected

Before you connect to your mobile hotspot,
you must insert a micro-SIM card (3FF),
install the battery, power on the
mobile hotspot, and charge your battery.
Note: To obtain a micro-SIM card, contact
your Internet service provider.
¾ To insert the micro-SIM card:
1. Remove the back cover using the
thumb catch on the corner of the
mobile hotspot.
2. Remove the battery.
3. Slide the micro-SIM card into the slot
with the gold colored contacts facing
down.
4. Ensure that the micro-SIM card is
seated securely.
5. Reinsert the battery.
6. Replace the cover.
7