Remote Control - IconBiT OMNICAST UHD Schnellstartanleitung

Remote control

1
2
Source
3
4
5
6
7
8
9
10
11
12
Remote Learning Zone
You are able to map your TV remote or any device button to the Remote control. Just follow the simple steps below.
1. Press and hold the power key in the TV learning zone
for 5 seconds until the button turns bright.
2. Press any key within the learning zone that you
would like to map.
3. When the LED light is blinking, point the TV remote
directly at the IR window located on top of the
remote, and press the TV remote key you would
like to map.
Power on/o
TV Learning Zone TV buttons (learning zone)
Previous/next
Increase/ decrease volume
Go to main menu
Return to previous screen or exit
K
O
Navigation buttons, start or pause playback
Access menu settings for current function
Enter/exit mouse mode
Numeric buttons
Settings
Delete number or character
4. Once the key is mapped, the LED will stop blinking.
5. Press the OK button on the OMNICAST UHD
remote to con rm.
6. Repeat the process above to map the other keys.
You can map up to a total of 5 keys in the
learning zone.
English 2/2