Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USER NOTES / FUNCTIONS
BOX ASSEMBLY
1.
Speaker check initially:
a. max.15 kg
b. Screw sockets: 2 x M5
b.
Distance: min.73 - max.83 mm.
2.
Screw the loudspeaker using the:
1 Washers
2 Screw (M5 x 12 mm, SW8)
3 Wrench (SW8/13)
to the speaker mounting plate.
For safety reasons, we recommend
that you work with two professionally
and physically suitable persons.
MAINTENANCE AND CLEANING
- Periodically check the tightness of the screw connections.
- Clean with a slightly damp cloth and a non-abrasive cleaning agent.
FAULT-FINDING (F) and REPAIR (R)
F: Loudspeaker wobbles
B: Check the screw connections of the tube, the joint and on the
B:
speker plate and tighten if necessary
TECHNICAL DATA
Wall and speaker plate, tube: steel, powder coated, black
Material
Joint: zinc die-cast, powder coated, black
Screw: steel, zinc plated
Load
Lautsprecher, max. 15 kg
Speaker plate: 127 x 60 mm
(Hole pattern: 73 - 83 mm, 5,5 mm)
Dimensions
Wall plate: 170 x 95 mm
Depth: 271 mm
Weight
1.1 kg
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
24195-000-55 Rev.10 03-80-735-00 10/18
Speaker plate
127 x 60 mm
Washer ø5,3/10 (2x)
Hexagon headed screw (2x)
SW8 DIN933 - M5 x 12 mm
Wrench
SW8/13
SETTINGS
Some speaker cabins include a socket screw for keeping a safety
rope. In case we recommend fixing the attached safety rope:
9 Safety rope, 1 washer, 2 hexagon headed screws M5 x 12 mm,
3 wrench (SW8/13)
TILTING
This wall adaptor has a toothed
pivot that allows for the adjustment
of speaker direction and tilt angle
(15-degree steps).
4 Hold the speaker so that when you
loosen the hex nut it will not fall over
5 Loosen hex nut (Do not remove)
6 As soon as the bracket is loose
enough (teeth are no longer meshed
together), rotate the speaker to the
desired position: 0 -15 -30 -45 -60 -
75 -90 degrees.
7 Retighten the hex nut
8 NOTE:
Make sure that teeth are in mesh.
SAFETY ROPE
DIRECTIONS
- continuously adjustable
19 Loosen hex screw M8 x 40 mm
19
by using wrench 3, (Do not remove)
10 Turn the speaker in desired position
11 Retighten the hex screw
Werbung
