Berker 2fach 16 A Bedienungsanleitung Seite 18

GB Safety instructions
Electrical equipment must be installed and fitted by qualified
electricians only. Observe the current accident prevention
regulations.
Failure to observe the instructions may cause damage to the
device and result in fire or other hazards.
The device is not suited for safe disconnection of the mains
supply.
Do not connect mains voltage consumers together with SELV/
PELV consumers to the same switching actuator.
Do not connect three-phase AC motors to the actuator.
The current detection and load monitoring functions must
not be used for safety-related applications, e.g. overload
detection.
These operating instructions are part of the product and must
be left with the final customer.
Use line m.c.b. with the corresponding rated current at the
outputs.
18