onga PA15-BR462 Montage- Und Betriebsanweisung Seite 8

Self Priming Pump For
Swimming Pools With Built-In
Prefilter. Protection Rating IP55
GENERAL INFORMATION
The pump-series BR400E is designed
especially for residential swimming
pools. The pumps are self priming
with a good performance. Features
include 4" trap with 3/4" drain plug
and 50mm adjustable inlet and outlet
unions (female slip), and see through
trap lid.
Motor: The strong motors are bu-
ilt to VDE standards and meet the CE
standards with the motor classifica-
tion IP55.
Electrical: 240 volt single phase
are supplied as standard with built-in
thermal overload protection.
The special mechanical seal was
specifically designed for this type of
pump.
The bearings are hermetically se-
aled and permanently lubricated.
Brown
Blue
Black
The capacitor is interchangeable,
fitted inside the terminal housing and
protected against the environment.
The pumps are delivered with
cord and plug (0.25kW to 0.75kW sin-
gle phase).
The BR400E (BR462E, BR463E, BR464E,
BR465E) series pumps have been de-
signed in compliance with standards:
IEC-335-1, EN 60335-2-41, CEI 61-69.
- Onga ECO-Line-
INSTALLATION
WARNING
Have the pump connected by a licen-
sed electrician according to the natio-
nal standards.
WARNING
This appliance must be earthed.
Have adequate floor drainage to
prevent flooding.
1) Discharge outlet
2) Filter cover
3) Suction inlet
4) Drain plug
8
Page