Herunterladen Diese Seite drucken

Fakir IPL 200.000+ SATINSKIN PRO SYSTEM Benutzerhandbuch Seite 11

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
2nd application method - "single light pulse":
Release the start button after each light pulse. For the next light pulse, place the device
next to the area just received the light pulse. Ensure that the light surface and the skin
contact sensor come in full contact with the skin. This mode allows applying thoroughly
on areas such as knees or ankles.
3.2. Applying To Face
• Do not use the device on men's faces.
• Do not use the device at intensity levels higher than 2 on the face. The device should
not be used on the area above the cheek bone or around eyes, brows and eye lashes
since it may cause serious damage. Do not use the device on the mucosa around the
nose-ear area.
• The face skin is extremely delicate and requires special care. In order to avoid adverse
consequences, consider all warning and safety instructions in the user manual. Before
applying to the face, we recommend you to familiarize with the device by using it on
your body. The device may be used on the area above the upper lip, on upper chin and
regions under the cheek bone, such as chin and neck.
• As you apply to your face, the intervals between the light pulses should be 5 seconds.
• Face applications should not exceed 10 minutes.
• Do not use slide application function when applying on your face or sensitive regions
areas.
WARNING!
After performing a skin sensitivity test on an area, wait for at least 1 week to use
device on that area.
For more information regarding applying the device to the face, please see "6.2.
Details regarding applications to the face" .
Application on upper lip
Place the light surface of the device as marked in the figure. Send a pulse for each
marked area.
Avoid applying on nostrils and lips, since these are more sensitive areas.
Upper chin and cheek application
Place the light surface of the device as marked in the figure. Send a pulse to
each area and move to one side of the cheek or the upper chin to another.
Neck and chin application
Place the light surface of the device as marked in the figure. Send a pulse to
each area and move to one side of the neck or the chin to another.
11
EN

Werbung

loading