Philips AJ 3010 Bedienungsanleitung Seite 4

XP AJ3010/00 20-06-2000 16:33
CONTROLS
1 Display
- shows the clock / alarm (small display) times and status
of the set
2 TIME SET
- to set the clock time
3 HR, MIN
- to adjust the hours (HR) and minutes (MIN) for clock /
alarm times
4 ALARM SET
- to set the alarm time
5 SLEEP / RADIO ON
- to activate sleep mode and adjust the sleep time
- to switch on the radio
6 ALARM RESET/ RADIO OFF
- to stop the active alarm for 24 hours
- to stop RADIO / SLEEP function
7 REPEAT ALARM /
BRIGHTNESS CONTROL
- to switch off the alarm for a 8 - 9 minute period
- to change the brightness of the display illumination
- to stop SLEEP function
8 ALARM
- to select alarm mode OFF / RADIO / BUZZER
9 VOLUME
- to adjust the sound level
4
Pagina 4
0 BAND
- to select FM-MW (or LW) waveband
! TUNING
- to tune to radio stations
@ Pigtail aerial
- to improve FM reception
# Mains cord
- for AC mains supply
$ RESET
- press if the set does not react to operation of any button
% Battery compartment
- for backup batteries
The type plate and the production number are located
on the bottom of the set.
Environmental information
We have reduced packaging to the minimum for easy
separation into two mono-materials: cardboard (box),
polyethylene (bags, protective foam).
Your set consists of materials which can be recycled if
disassembled by a specialized company. Please observe local
regulations on the disposal of packing materials and old
equipment.