Picture Menu - Changhong LED32E2200ST2 Bedienungsanleitung

Menu Operation
■
Signal Information(Only available when there is signal under DTV)
Press the▲/▼buttons to select the Signal Information, then press the ENTER
button to see the detail information.
CI Information (In DTV mode)
■
This function enables you to watch some encrypted services (pay services).
Please insert CI card into the PCMCIA slot according to the arrow on the CI card.
NOTE:
 The function can only be gotten when CI slot is available.
 It is possible for you to change CI (Common Interface) menu screen and service
by consulting your dealer.
 Please do not insert or pull out the CI card when power on.
 Do not insert or pull out the CI card frequently so as to avoid any damages of the
TV and the CI card.
 During initialization of the CI card, please don't operate the TV.
■ Picture Mode: You can select the type of picture which best corresponds to your
viewing requirements. Contrast, Brightness, Colour, Tint and Sharpness can be
adjusted when the picture mode is set to personal.
■ Contrast: Adjust the white level of the picture.
■ Brightness: Adjust darkness of black sections in the picture.
■ Colour: Adjust the color intensity of the picture.
■ Tint: Adjust the hue of the picture. (Only in the NTSC mode)
■ Sharpness: Object edges are enhanced for picture detail.
■ Colour Temp: Select the color temperature that you feel comfortable.
■ Noise Reduction: Reduces the picture noise in a weak broadcast signal.
■ HDMI Mode: Sets the TV so that it senses and then processes HDMI signals all
sources automatically and adjusts the picture for optimum quality.

Picture Menu

Move Return
19
Select Exit