Troubleshooting - Cabletech Urz0971 Bedienungsanleitung

CLEANING
• Always disconnect the device from power supply
socket before cleaning.
• Clean this device with a soft, slightly damp cloth.
• Do not use any abrasives or chemical agents to
clean this device.

TROUBLESHOOTING

Problem
No power
No picutre
Picture
interference
Possible solution
Check if the device is correctly
connected to the power supply
Make sure the display device is on
and correctly connected to the switch
Make sure the source device is on
and correctly connected to the switch
Check the connection quality.
Check condition of the connected
cables.
Connect the appliance once again
Check condition of the connected
cables.
EN
Owner's manual
15