KERN DBS-A02 Installationsanleitung Seite 31

Start moisture determination for a sample
Data output for header will commence immediately after moisture determination was
started. Depending on the setting for the output interval (See chap. 4.2), output of
measured values will take place for instance every 2 minutes.
Once drying has been completed, the measured result will be displayed (footer)
Example protocol:
DBS-A02-IA-e-1110
Header:
Company
Model
Serial no.
ID no.
Sample description
Date
Time
Program no.
Unit Display of results
Drying mode
Drying temperature such as 120 °C
Cut off criteria such as 2 min
Initial weight such as 20.081g
Measured value output as per set output
interval such as every 2 min
Footer:
Measured result such as remaining
weight 20.004g
15