4 Moisture meter settings
The communication parameters (such as baud rate, bits and parity) of the moisture
meter and the transfer software must be concordant for data transfer to take place.
4.1 Interface parameters
1. Press the Menu button to access the menu and
the first menu item "PRoGRM" will be displayed.
2. Use the navigation buttons
item „CoM.SET".
3. Confirm with ENTER key, the currently preset
port will be displayed
oUT.I = RS232
oUT.2 = USB
4. Use the navigation keys to select
5. Press ENTER to save input and the currently
preset baud rate will be displayed.
6. Use the navigation buttons
desired setting.
7. Press ENTER to save input, the next interface
parameter will be displayed.
Set all interface parameters in turn and then repeat
steps 6 and 7 in each case.
• Baud rate
Selectable settings:
Display
B.1200*
Baud rate
1200bps
• Parity
Selectable settings:
Display
P.NoNE*
Parity
Small parity, 8 bit
DBS-A02-IA-e-1110
to select menu
„oUT.2".
to select the
B.2400
B.4800
2400bps
4800bps
Odd parity, 7 bit
B.9600
B.19.2k
9600bps
19.2k bps
P.oDD
Straight parity, 7 bit
B.38.4k
38.4k bps
P.EVEN
9