Assembly - Leggero Cuatro T Bedienungsanleitung

Leggero® Cuatro TT
Operating safety ____________________________________________
Please note the following instructions. This will to ensure several years
of operational safety:
• Have the trailer inspected periodically in a specialist workshop (at least
every three years).
• Aluminium components are sensitive to deformation and cracks.
Warped aluminium components should be replaced immediately.
Risk of breakage: Never bend deformed or warped aluminium com-
ponents back into position.
• Plastic components can become brittle due to the influence of weather
conditions. Cracked or damaged parts should be replaced immediately.
• Severely corroded steel components should be replaced immediately.
Driving behaviour___________________________________________
Bicycles with trailers behave differently when braking and negotiating
curves. Familiarise yourself with this different cycling behaviour on suit -
able terrain before using the trailer in traffic.
Danger: it should be noted that the braking distance in particular is
lengthened increased when the trailer is hitched to the bicycle.
You should develop a restrained cycling style to prevent the trailer swin-
ging out to the side or even turning over. Particular attention is deman-
ded when driving downhill, where the speed should be adapted to suit the
terrain.
Scope of delivery (Illus. 3)
Leggero® Cuatro transportation trailer model _____________________
Designation
A TT railing
B Chassis
C Draw bar T
D Hood
E Wheel (compl.)
F Coupling
G Instruction manual
Assembly material __________________________________________
Designation
H M8x120 cylinder head screw
I M8 washer
J Allen key (no. 5)
Check that the delivery is complete and inspect for damage after
unpacking.
NumberAmount
1
1
1
1
2
1
1
NumberAmount
2
2
1