Physical Dimensions - Mettler Toledo ACM500 Installationsanleitung

1.5.

Physical Dimensions

The physical dimensions for the ACM500 communication module, for use with the IND560x, are
listed in Table 1-1. The mounting measurements are shown in Figure 1-1 in mm and inches.
1.6. Specifications
The ACM500 communication module, for use with the IND560x terminal conforms to the
specifications listed in Table 1-1.
Enclosure Type
Dimensions (H × W × D)
Overall (Y x Z)
Shipping Weight
Environmental Protection
Operating Environment
Hazardous Areas
Power
IND560x Communications
1-4 METTLER TOLEDO ACM500 Installation Manual
Figure 1-1: ACM500 Communication Module Dimensions
Table 1-1: ACM500 Specifications
ACM500 Specifications
Type 304L stainless steel enclosure
208 mm × 263 mm × 116 mm
(8.2 in. × 10.4 in. × 4.6 in.)
320 mm × 217 mm
(12.6 in. x 8.5 in.)
5.5 kg (11.2 lb)
IP66, TYPE 4
Can be operated at temperatures ranging from −10° to 40° C (14° to 104°
F) at 10% to 95% relative humidity non-condensing.
Not designed for use within hazardous areas. The ACM500 must be located
in a non-hazardous environment.
Operates at 100-240 VAC, 50–60 Hz, 250 mA and includes power cord for
country of use.
Two fiber optic or intrinsically safe current loop interface circuits required for
full communication, but only 1 may be required for some applications. One
circuit is required for optional PLC and COM2/COM3 communications. The
other circuit is required for Ethernet.
64061976 | 07 | 01/2019