Basic Configuration; Finding The Km1 Communication Module By Means Of The Devicediscoverytool - Resol KM1 Installationsanleitung

6 Basic configuration
The basic configuration does not require detailed knowledge about the solar ther-
mal system or the network environment and can be carried out using the guidelines
in this manual.
In order to carry out the basic configuration, proceed as follows:
Î Finding the KM1 Communication module by means of the
DeviceDiscoveryTool.
Î Changing the web interface language.
Î Changing the Live data screen language.
Î Changing the user password.
Î Changing the device name.
Î Changing the time configuration.
Î Configuring automatic firmware update configuration.
Î Changing the remote access password.
6.1 Finding the KM1 Communication module by means of the Device-
DiscoveryTool
The DeviceDiscoveryTool is a software that displays RESOL products that are con-
nected directly via the local network.
Note
The factory setting for both user name and password is admin.
There are 2 different ways to start the DeviceDiscoveryTool:
• Over the Internet browser
• From the included CD
Note
To start the DeviceDiscoveryTool, Java (version 6 or higher) must be ins-
talled on the computer.
Starting the DeviceDiscoveryTool over the Internet browser
In order to start the DeviceDiscoveryTool over the Internet browser, proceed as
follows:
Î Start the Internet browser.
Î Enter http://www.vbus.net/discover into the address bar of the Internet
browser and confirm.
26
Î Click Java WebStart-able.
All LAN-enabled RESOL products found are displayed.
Î Click the KM1 Communication module to mark it, then click the Open button.
A new window opens.
Î Enter user name and password.
The factory setting for both user name and password is admin.
The home screen of the KM1 Communication module web interface opens.
Continue at chapter 6.2 Changing the web interface language on Kapitel 6.5
Changing the device name page 27 .
Starting the DeviceDiscoveryTool from the included CD
Note
Starting the DeviceDiscoveryTool from the CD is possible under a Win-
dows operating system only.
In order to start the DeviceDiscoveryTool from the included CD, proceed as fol-
lows:
Î Open the DeviceDiscoveryTool folder.
Î Start the Start DeviceDiscoveryToolSetup.exe.
Î Confirm all following dialogues with OK.
Î Click Start / Programs / RESOL / DeviceDiscoveryTool / DeviceDisco-
veryTool.
All LAN-enabled RESOL products found are displayed.
Î Click the KM1 Communication module to mark it.
Î Click Open.
A new window opens.
Î Enter user name and password.