Mitsubishi Electric PAC-SC30GRA Anweisungshandbuch Seite 11

(4) Horizontal blow
1 Press the
• The horizontal blow are operated and stopped whenever the
pressed.
[Display example]
(5) Air direction
1 Press the
• The direction of the fan will change whenever the
• Only I - IV will be displayed without V if the indoor unit is not equipped with the swing function.
(6) Ventilation setting
1 Press the
• The ventilation unit is operated whenever the
Off Low
• Once the interlocked operations between the indoor unit and the ventilation unit have been set
once, the same operations can be repeated simply by pressing the
• The
enable only the ventilation unit to be used. (The
(7) External timer
1 Press the
external timer switch.
• The external timer is activated and deactivated whenever the external timer switch is pressed.
The will be illuminated when the external time is activated and start/stop operations will be
performed in accordance with the PROGRAM TIMER settings (sold separately.)
horizontal blow switch.
<When the horizontal blow
are operating>
Interchangeable display
air direction switch.
1 2
ventilation setting switch
[Display example]
High
ventilation setting switch is valid even when the air-conditioner is not operating to
↔
air direction setting switch is pressed.
3 4
ventilation setting switch is pressed.
<With low ventilation>
switch operations are not necessary.)
ON/OFF
horizontal blow switch is
<When the horizontal blow
are not operating>
No display
5
<With high ventilation>
switch.
ON/OFF
11