Atlantis Land WebShare 340 Anleitung Seite 36

These are configuration parameters:
•
Virtual Circuit: Enable
•
VPI: 0 or 1 (check with your ISP)
•
VCI: 38 or 50 (check with your ISP)
•
NAT: Enable
•
Username: Enter the username provided by your
ISP(case sensitive).
•
Password: Enter the password provided by your ISP
(case sensitive).
•
Service Name: This item is for identification purposes. If
it is required, your ISP will provide you the information.
•
IP Address:0.0.0.0
•
Authentication Protocol Type: Default is Chap (Auto).
Your ISP will advise you whether to use Chap or Pap.
•
Connection: Chose Always On If you want the router
to establish a PPPoE/A session when starting up and to
automatically re-establish the PPPoE/A session when
ENGLISH
36