Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Adjust the antenna vertically.
Select the desired channel via the DIP-switches.
1
2
3
4
CH
CH
CH
CH
5
6
7
8
CH
CH
CH
CH
9
10
11
12
CH
CH
CH
CH
13
14
15
16
CH
CH
CH
CH
Plug the connection cable of the power-unit with the DC IN-socket. Plug the power unit into your outlet.
6. OPERATION
With the ON/OFF-switch, you can switch the device on and off. When switching the device on, the LED is
illuminated.
If microphone signals are being received, the RF-LED is illuminated.
For optimum receiving please follow these instructions:
•
Maintain a line-of-sight between the transmitter and receiver antennas, if possible. Avoid placing
transmitter and receiver where metal or other dense materials may be present.
•
Avoid placing the receiver near computers or other RF generating equipment.
Adjust the signal output level via the Volume-control.
If the receiver is no longer used, please turn the Volume-control to 0 and switch the device off.
IMPORTANT: Every wireless microphone installation is a unique situation, and can present a variety of
problems. Never attempt a live performance without first conducting a test of the system in the performing
area. If major changes (additional wireless systems or intercoms, relocation of scenery, etc.) have been
made since the last test, check the wireless system again - as close to performance time as possible.
Squelch Adjustment
muting), but it extends the operating range.
The Squelch-control is factory preset at the 12 o'clock position for optimum
performance. No further adjustment is normally required. However, it is possible
to adjust the squelch control to emphasize either signal quality or system range.
To raise the squelch threshold, rotate the control clockwise. This causes the
receiver to demand a higher quality signal (less noise before muting), but it
reduces the operating range. To lower the squelch threshold, rotate the control
counterclockwise. This allows a lower quality signal through (more noise before
18/35
00026326.DOC, Version 1.3
Werbung
Inhaltsverzeichnis
