General
About
User instruction manual, electronic loads series EL 000
Elektro-Automatik GmbH & Co. KG
Helmholtzstrasse 1-
41747 Viersen
Germany
Phone: +(49) 02162 / 7850
Fax: +(49) 02162 / 1620
Web: www.elektroautomatik.de
Mail: info@elektroautomatik.de
© 2008 Elektro-Automatik
Reprint, duplication or partly, wrong use of this user instruc-
tion manual are prohibited and might be followed by legal
consequences.
Date: June, 2008
© 2008, Elektro-Automatik GmbH & Co. KG
Safety instructions
•
Only operate the device at a mains voltage as stipulated
on the type plate
•
Never insert mechanical parts, especially from metal,
through the air ventilation slots
•
Avoid any use of liquids of any kind in the proximity of the
device, they might get into it
•
Do not connect voltage sources to the device which are
able to generate voltages higher than 100V
or 180V
(160V model) or 460V
DC
•
In order to equip interface cards into the slot at the rear,
the common ESD provisions have to be followed
•
The interface card may only be plugged and unplugged
while the unit is completely switched off (mains switch
OFF)
•
Always observe limit and nominal values of the device when
connecting a voltage source or battery, as well as when
using the analogue interface
EN
(80V model)
DC
(400V model)
DC
2