Velleman RCQC6 Bedienungsanleitung Seite 5

4. Overview
Refer to the illustrations on page 2 of this manual.
1 photo button
2 video button
3 power/charging LED
4 fine-tune switch left-right
5 fine-tune switch forward-backward
6 charging dock
7 right cyclic stick (left-right-forward-backward)
8 charging LED
9 charging dock
10 on-off switch
11 left throttle stick (accelerator-rotation)
12 high/low speed switch
13 headless mode
5. Charging
battery. When the device reaches end-of-life, it
Do not puncture batteries or throw them in fire
as they may explode. Do not attempt to recharge
non-rechargeable batteries (alkaline). Dispose of
1. Connect the remote control to a powered USB port using the included
cable. Remember to switch off the remote control. The power/charging
LED will switch off as soon as the remote control is fully charged.
2. Carefully remove the battery from the drone and it in its charging
dock. The charging LED will switch off as soon as the battery is fully
charged.
3. Carefully re-install the battery in the drone.
4. Disconnect the remote control from the USB port. Your drone is ready-
to-fly.
V. 01 – 20/06/2017
This device contains an internal rechargeable
must be disposed of in accordance with local
batteries in accordance with local regulations.
Keep batteries away from children.
RCQC6
WARNING
regulations.
WARNING
5 ©Velleman nv