Configuration; Display Mode - Phonocar VM 206 Gebrauchsanweisungen

GB
Digital TV

Configuration

Configuration provides individualized system setup function, you can configure the system according to
your own hobby and
demand. You can enter Configuration menu via the menu (MENU->Digital TV->Configuration) .
OSD
Via OSD option set up, you can set the user interface display mode according to your own demand. Via the
menu( MENU->Digita TV
->Configuration->OSD) ,You can enter OSD menu. All options are listed on the left of the OSD menu, when
the cursor moves on the option in OSD menu, values corresponding to this option will show on the right of
the menu. These are options in OSD menu: (1).OSD option sets current system menu mode . (2).Time on
OSD Option sets whether to display system time in full¬screen play channel, Move the cursor to Time on
OSD option, press VOL+/-key to choose between on and off, the default is off. (3).Trans option sets menu
transparency, press VOL+/-key to adjust between 0%-60%. (4).OSD Timeout option sets some information
hint dialogue box and displays time length, move the cursor to OSD Timeout option, press VOL+/-key to
choose circularly between Bottom and Top.
OSD Language option: The system has the user interface supporting a few of languages, you can set
language via OSD language option: (1).Move the cursor onto OSD Language option, Press RIGHT key
to enter OSD Language List. (2).Press VOL+/-key choose language. (3).Press OK key to confirm system
interface language selection, setting is effective, and then the interface language turns into the currently
chosen language, the cursor can move onto OSD Language, option on the left.
1. 1st Audio Language option: Press VOL+ key to enter the currently supported Audio Language list, press
CH+/-key to choose language, press OK key to confirm.
2. 2nd Audio Language option: Press VOL+ key to enter the currently supported Audio Language list, press
CH+/-key to choose language, press OK key to confirm.
3. Press OK key to confirm the editing action in OSD menu, the system will hint with "Update succeeds"
and then return to the previous menu.
TV
TV set up provides convenient TV input mode, you can via menu (MENU->Digital TV->Configuration->TV),
you can enter TV set .
All options are listed on the left of the menu, when the cursor moves to the option on the left of the TV
menu, the values corresponding to this option will display on the right of the menu.

Display Mode

TV mode can change the mode of the output video, you can adjust TV mode according to the actual
situation of you receiving equipment. (1).Move the cursor to Display option, press VOL+/-key to choose
circularly among the options, and the TV mode can be set effective immediately. (2).TV Mode can be set as
Auto, PAL, NTSC. (3).Default TV Mode: AUTO. (4).Press OK key to save the setting.
31