Switch.to.radio.tuner.source; Select.fm/Am.band; Auto.tuning; Manual.tuning - ZENEC ZE-MC170 Bedienungsanleitung

15.. . Touch.to.change.among.the.following.bands:.FM-1,.FM-,.FM-,.AM-1.
16.. . .Touch.to.automatically.scan.and.store.stations.in.current.radio.band...
You.can.also.press.the.AS/PS.button.on.the.unit.
17.. .Touch.to.seek.backward.
18.. .Touch.to.seek.forward.
19.. .Touch.to.tune.backward.one.step.
0.. .Touch.to.tune.forward.one.step.
1.. PTY.indicator.
SWITCH TO RADIO TUNER SOURCE
Press.the.SRC.button.on.the.front.panel.or.on.the.remote.control.to.switch.to.the.tuner.
source.
SELECT FM/AM BAND
Touch. the. BAND. button.
control.to.change.among.the.following.bands:.FM-1,.FM-,.FM-,.AM-1.
AUTO TUNING
Press.the. .button.on.the.remote.control.or.touch.the.
[:]
the. next. available. channel. by. increasing. the. tuning. frequency.. Press. the. button. again. to.
stop.searching.
Press.the. .button.on.the.remote.control.or.touch.the.
[9]
the.next.available.channel.by.decreasing.the.tuning.frequency..Press.the.button.again.to.
stop.searching.
MANUAL TUNING
Touch.the. .or.
USING PRESET STATIONS
1.numbered.preset.buttons.store.and.recall.stations.for.each.band..Front.6.stored.stations.
(P1-P6).for.the.current.band.appear.on.the.screen,.touch.the.channel.directly.for.use.
You.can.touch.the.arrow.
Storing a station
1..Select.a.band.(if.needed),.then.select.a.station.
... T ouch. and. hold. an. on-screen. preset. button. (6). for. three. seconds.. The. preset. number.
appears.at.the.top.of.the.screen.
Recalling a station
1..Select.a.band.(if.needed).
..Touch.an.on-screen.preset.button.(6).to.select.the.corresponding.stored.station.
. on. the. screen,. or. press. the. BAND. button. on. the. remote.
.button.to.increase.or.decrease.the.tuning.frequency.one.step..
.buttons.on.the.screen.to.select.other.stations.
.
.button.on.the.screen.to.seek.
.button.on.the.screen.to.seek.
71 71
ENGLISH ENGLISH