Installation - Zanussi ZGG35214 Benutzerinformation

place free of charge, even during the warranty
period.
These data are necessary to help you
quickly and correctly. These data are
available on the supplied rating plate.
• Model description .................
• Product number (PNC) .................
A
MOD.
PROD.NO.
SER.NO
DATA
MODEL
A) Stick it on Guarantee Card and send this
part (if applicable)
B) Stick it on Guarantee Card and keep this
part (if applicable)

Installation

Warning! Refer to the Safety chapters.
Warning! The following instructions
about installation, connection and
maintenance must be carried out by qualified
personnel in compliance with standards and
local regulations in force.
Gas Connection
Choose fixed connections or use a flexible
pipe in stainless steel in compliance with the
regulation in force. If you use flexible metallic
pipes, be careful they do not come in touch
with mobile parts or they are not squeezed. Al-
so be careful when the hob is put together
with an oven.
www.zanussi.com
B
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
MODEL
• Serial Number (S.N.) .................
Use the original spare parts only. They are
available at Service Force Centre and ap-
proved spare parts shops.
Labels supplied with the accessories bag
Stick the adhesive labels as indicated below:
C
MOD.
PROD.NO.
0049 SER.NO.
C) Stick it on instruction booklet
Important! Make sure that the gas supply
pressure of the appliance obeys the
recommended values. The adjustable
connection is fixed to the comprehensive ramp
by means of a threaded nut G 1/2". Screw the
parts without force, adjust the connection in
the necessary direction and tighten everything.
TYPE
230V-50Hz
IP20
9