Technical Specification - Azusa MIK0076 Bedienungsanleitung

TECHNICAL SPECIFICATION

Main mix noise
(20Hz-20kHz bandwidth, channels 1-3 gain @ unity gain, channel EQ flat, all channels
assigned to main mix, channel 1 panned left, 2 panned right, 3-8 centered)
Main mix knob down, channel level knobs down:
Main mix knob unity, channel level knobs down:
Main mix knob @ unity, channel level knobs @ unity:
Total harmonic distortion (THD)
(1kHz @ 35dB gain, 20Hz-20kHz bandwidth)
Mic pre @ insert: 0.001%
Attenuation (crosstalk)
(1kHz relative to 0 dBu, 20Hz-20kHz bandwidth, line in, 1/4" main out, gain @ unity.)
Main mix knob down:
Channel Alt / mute switch engaged: -100 dBu
Channel level knob down:
Frequency response
30Hz to 30kHz, mic input to any output, @ 60dB gain: +0dB / -1dB
10Hz to 100kHz, mic input to any output, @ unity gain: +0dB / -3dB
Maximum levels
Mic in:
Tape in:
All other inputs:
Main mix XLR out:
All other outputs:
Impedances
Mic in:
Channel insert return:
All other inputs:
EN
Tape out:
Phones out:
All other outputs:
24
Owner's manual
-75 dBu
-100 dBu
+21 dBu
+22 dBu
+22 dBu
+28 dBu
+22 dBu
3.4kΩ
5kΩ
20kΩ or greater
1kΩ
60Ω
120Ω
XLR -95 dBu
TRS -101 dBu
XLR -90 dBu
TRS -96 dBu
XLR -84dBu
TRS -90dBu