Safety Instructions - Azusa MIK0076 Bedienungsanleitung

SAFETY INSTRUCTIONS

• Read through the manual before operating.
• Keep the manual for future reference.
• To prevent fire or shock hazard, do not expose the unit to rain or moisture.
• Do not remove cover or back, no user serviceable parts inside. Refers ser-
vicing to qualified service personnel.
• If the device is not used for a period of time, unplug the power cord and take
batteries away from the unit.
• Turn off the device before cleaning. For cleaning use a damp cloth (do not
use chemical cleaners).
PATCHBAY DESCRIPTION
MIC inputs (channels 1-3)
Line inputs (channels 1-2)
Stereo line inputs (channels 3-4, 5-6 and 7-8)
Channel insert (channels 1-2). These jacks arew here you connect serial effects
such as compressor, equalizer, de-essers or filter.
Low cut (channels 1-3). Each low-cut switch, often referred to as a high-pass
filter, cuts bass frequences below 100Hz.
Instrument switch (channels 1-2). Press these in if you want to connect a guitar
or other instrument level source directly to the line inputs of channel 1 and 2.
Gain (channels 1-3)
Owner's manual
EN
15