Herunterladen Inhalt Inhalt Diese Seite drucken

Contents Of Package; Safety Instructions; Mounting The Antenna - Carrera RC Jeep Wrangler Rubicon Montage- Und Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4

Contents of package

1 x Jeep
Wrangler Rubicon
®
1 x Controller
1 x Lanyard
1 x Battery Charger

Safety instructions

1
2
3
4
5
1 x Rechargeable Battery
1 x Antenna
1 x 9 V Block Battery
(non­rechargeable)
A Carrera RC vehicle is a remote-con-
trolled model car that uses special
rechargeable batteries for this purpose.
Only original Carrera RC Li-Ion
rechargeable batteries may be used.
The Carrera RC vehicle is designed for
hobby use only and may only be oper-
ated on tracks and in spaces especially
intended for this purpose.
CAUTION! Do not use the Carrera RC
vehicle in road traffic.
Do not operate the car beneath over-
head high-voltage cables or broadcast-
ing masts or during a storm! Atmos-
pheric disturbances can affect the oper-
ation of the vehicle.
Never operate the product on grass
surfaces. There is the risk of grass hin-
dering the movement of the axles,
which can lead to the motor overheat-
ing. Do not use the Carrera RC vehicle
for transporting goods, persons or ani-
mals.
Never use the Carrera RC vehicle out-
doors during rain or snowfall.
6
7
8
9
10
RED = Charging
GREEN = Ready
11

Mounting the antenna

1
9
Never operate the vehicle near rivers,
ponds or lakes, to avoid the risk of the
Carrera RC car falling into the water.
Do not expose the Carrera RC vehicle
to direct sunlight.
Handle the tip of the antenna with care.
Danger of injury!
Never use strong solvents for cleaning
the car.
To avoid malfunctions to the control
system resulting in uncontrolled opera-
tion of the Carrera RC vehicle, check
that the controller batteries and the
rechargeable batteries in the vehicle
have sufficient charge.
The Carrera RC vehicle must be
inspected before and after operation,
each time it is used, to ensure that it has
not become disassembled. Any screws
or nuts that may have become loosened
during operation must be tightened.
Push the antenna cable through the
antenna tube and then mount this
to the Carrera RC vehicle. Secure
the end of the antenna cable with a
Carrera RC sticker from the logo sheet.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis