Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Notes on using with a WD-820A
• This unit does not supply the internal booster of the
optional AN-820A UHF Antenna through the ANTENNA
A,B connectors. It is impossible to connect the AN-820A
directly.
• When adding the WRR-802A by cascade connection to a
tuner system containing the WD-820A UHF Antenna
Divider, use a coaxial cable (5D-2V, RG-212/U or
equivalent) with length of 30 m as shown in the figure.
• To avoid noise, remove the transmitter from the antennas
as far as possible when setting the channel or waiting with
the transmitter powered.
WRR-802A
WD-820A
Tuner
a) Coaxial cable (30 m)
AN-820A
a)
a)
Notes
• Do not simultaneously use two or more microphones and
transmitters that are set to the same channel.
• Separate the reception antennas and the transmitter by
more than 3 meters.
• The number of wireless microphone channels actually
usable in a multi-channel system may be smaller than the
normal capacity of that system if there is interference from
TV broadcasting or other RF signals.
• When operating two or more UHF wireless microphone
systems using the same wireless channel in the same
group, ensure that the systems are at least 100 m
far as they are installed within sight of each other.
1) The distance depends on the operating environment and conditions.
1)
apart as
11
GB
Werbung
Kapitel
Inhaltsverzeichnis
