Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Channel Setting
Here is explained channel setting for the CE62 model as
an example.
Take the following precautions to prevent interference and
noise.
• If there is a TV broadcasting station nearby, to avoid
possible interference from its broadcasting, do not use that
station's channel.
• When simultaneously using two or more tuners, always set
the tuners to different channels within the same group
(other than group 00).
1
3,4 2
1
Turn the POWER switch on.
The message "CE62" appears on the display, and then
the current status of this unit is displayed.
8
GB
2,3,4
Note
Turn the POWER switch on after reducing the volume
of equipment connected to the TUNER OUTPUT
connector. Otherwise, noise will be heard when the
power is turned on.
2
While holding down the GP button, press the + or –
button to select a group.
Each time you press the + or – button, the GP indication
changes as shown in the following figure. To change the
indication continuously, press and hold down the + or –
button.
–
GP
CH
+
GP
CH
Werbung
Kapitel
Inhaltsverzeichnis
