Livall BH50M Anleitung Seite 8

4.7 Connecting to "LIVALL" App
For Android: Start LIVALL Riding. The App will
automatically connect to the helmet;
For IOS: Follow LIVALL Riding guide to connect
to the helmet.
Only if the helmet is successfully connected to LIVALL APP, SOS alert feature and LED light indicators can
work.
V. Considerations
1.
The helmet contains electronic parts inside. Please do not take a long ride in the rain although the helmet
can prevent the rain from splashing.
2. After the helmet gets wet in the rain, the water droplets might occur in the chimney of tail LED lights. The
water droplets will disappear when you put the helmet under the ventilation environment for 1-2 days.
3. The helmet contains the battery of 3.7V/600mAh. The battery capacity varies with temperature change.
The battery life can decay when the helmet is used at low temperatures or below Zero degrees Celsius.
4. If the electronic functions do not work, please charge the helmet for 3 hours and then check if it works
normally.
5.
The helmet contains impact detection devices. Only if you connect your helmet with LIVALL APP, start
ride mode on the APP and your helmet suffers from the heavy impact, SOS alert feature can be triggered.
Your emergency contacts set on LIVALL APP can accordingly receive your SOS messages.
8
LIVALL Riding APP
LIVALL ON FACEBOOK