Start To Use - Denver KCA-1310 Bedienungsanleitung

Start to use

1.Replace AA *4 battery(not incl.)
1.1. You can switch the battery do switch to open the battery
door as shown in the figure below.
1.2. Please put AA*4 battery in the right way into the camera.
2.How to use the memory card
2.1. Properly insert the TF card into the card holder as per
the intructions near the card holder.
2.2. To remove teh TF card, press the end of memory card gently,
the card will be ejected.
Note: The camera is not equipped with built-in memory. Please insert memory card before using. Before using the camera, it is
a must to format the memory card on the camera.
_ _
ENG 04