Operating Instructions - Opus Mix 31; Applications; Connections; Mounting - Beyerdynamic Opus Mix 31 Bedienungsanleitung

OPERATING INSTRUCTIONS - OPUS MIX 31

Thank you for selecting the Opus Mix 31 mini mixer. Please
take some time to read through these operating instructions
before using the product.

Applications

The Opus Mix 31 has been developed to supply a maximum
of 3 condenser microphones. It allows operating the micro-
phones in conjuction with a wireless microphone system or a
wired power supply unit.

Connections

The Opus Mix 31 provides three 4-pin mini XLR inputs (male)
to connect microphones. Use the appropriate volume
controls to compensate different levels between treble and
bass with accordions or voice and instrument.
The Opus Mix 31 has a 4-pin mini XLR output (female) to
connect a beltpack transmitter (e.g. TS 100 Mk II, TS 300 or
TS 800 (M)) or a wired power supply unit (e.g. CV 18).

Mounting

On the rear of the Opus Mix 31 there is a clip to attach the
mini mixer to your belt or guitar strap. By using the supplied
adhesive Velcro ® pads you can attach the Opus Mix 31 to the
instrument as well.
Powering
The Opus Mix 31 is powered by a 9 V alkaline battery. The
average operating time is approximately 70 hours. Open the
battery compartment at the bottom of the Opus Mix 31 and
insert the battery according to the polarity marks. After
switching on the Power LED will illuminate. If the battery is
empty, the Power LED will extinguish.

Maintenance

To clean the housing of the mini mixer use a soft cloth
moistened with water. Make sure not to allow any water to
enter the housing.

Service

Servicing must be carried out by qualified service personnel
only. Dismantling the device yourself will invalidate the
guarantee.
8