Steinbach 036430 Bedienungsanleitung Seite 3

EN
This concerns your safety and your health! Please read these
Operating Instructions and the Safety Instructions carefully prior to
using the article for the first time.
Do not allow the folding rods to get into the hands of children. The
individual segments of the rods are contracted by a rubber strap.
Children may easily get their fingers caught in there.
Be careful when erecting the pool cover. The rods are under tension.
When you slide the pin into the rods, take care not to get your fingers
caught in them. It is best that two persons work together when the
pool cover is erected, on account of the size of the pool cover.
Delivery, Figure A –F
A Tarpaulin
B Fibreglass poles
C Nail pegs
D Guy lines
E Protective floor covers
F Weights (for filling with sand)
Repair
Repair small leakages at the seams by means of seam sealant and at
the pool cover fabric by means of impregnation spray.
You can repair small holes or tears in the fabric by means of a suitable
repair set for nylon/polyester fabric.
Cleaning
Use the usual commercial means of care for polyester fabric for the
cleaning of the pool cover.
Do not wash the pool cover in the washing machine.
Do not have the pool cover cleaned by the dry-cleaner.
Mounting, Figure 1 – 17
Assembly of weights (for filling with sand)
Figure A-D, 1-8
ATTENTION!
The rooftop of the pool has to be removed by sudden growth of
intense winds or storms. It is not designed for these weather
conditions.
The storm supports and fillable weights included in the delivery offer
limited protection only. Damage caused by strong winds/storms is
excluded from guarantees and warranty claims.
Dismantling
Dismantling is carried out in the reverse order of assembly.
Packing and storing
Pack the components of the pool cover in a dry and clean condition to
avoid the creation of mould. Allow the parts to dry thoroughly if they
have become wet during use.
Store the parts of the pool cover at a dry place. The fabric, the rods
and zipper may be attacked by mould or corrosion if stored in a wet
condition.
When you are working with rods in general: When joining the
components of the rods, take care that your fingers will not be
caught in them.
Speedcover - Whirlpooldach| 2017_V1
Fibre glass rods: The individual rods are under tension when you
insert them into the second metal eye. Take care that they do not
spring out of your hand you might get hurt.
Erection rods: One of the ends of the erection rods is pointed. Take
care that you do not hurt your eyes.
UV Light: Please note that colour differences may arise due to
exposure to sunshine (UV light). The product is only suitable for use
during the swimming season, and should be dismantled and stored
appropriately afterwards.
Steinbach VertriebsgmbH,
Aistinger Straße 2, 4311 Schwertberg, Österreich
e-mail: service@steinbach.at
www.steinbach.at
https://service.steinbach.at
Page 3 of 16