Use - vidabelle VD-5346 Bedienungsanleitung

Use

Caution - material damage
Use the foot warmer when sitting only. Do not use the product stand-
ing. Your own weight may damage the heating wires and the massage
function motor inside the product.
• Do not use the foot warmer without the fabric inlay inserted.
• The foot warmer can be used when turned off as both the fabric
1. Check whether both switches (Heat and Massage) are at OFF.
2. Place the foot warmer on the ground before your seat (chair, armchair, etc.). The
foot warmer may not be folded or bunched.
3. Connect the power cable and control.
4. Unwrap both cables and plug the power plug into a power outlet.
5. Sit back comfortably and slide your feet into the fabric inlay.
You must first take off your shoes.
6. Select the desired function using the Heat and Massage switches.
Use the Heat switch to select the warming function:
− HI: maximum heat
− OFF: heating function is off
− LO: low heat
Use the Massage switch to select the warming function:
− HI: strong vibration
− OFF: massage function is off
− LO: low vibration
The Heat and Massage functions can be used in combination or separately.
7. To turn off the current function, switch the appropriate switch to OFF. Then unplug
the power plug from the outlet.
Notes on use
• To heat up the foot warmer quickly, set the switch to level HI.
• To use the foot warmer over a longer period, we recommend setting the switch to
level LO.
• You should not use the massage function for longer than 20 minutes at a time.
inlay and the foot warmer itself have a naturally warming effect
even without power.
21