USRobotics 9110 Installationsanleitung Seite 7

2. Connect the included power adapter to the power socket on the Wireless
54Mbps ADSL Router. Plug the power adapter into a standard power
outlet. Turn on your computer.
Step Four: Configure the basic connection settings
Your Internet connection user name and password may be required for the
installation of the Wireless 54Mbps ADSL Router. Depending on your ISP, you
may need to know some of the following information: IP Address, Subnet
Mask, Gateway/Router, DNS Servers/ Name Servers, and Service Name
(optional).
Note: If you cannot find all the necessary information, contact your ISP for
assistance in obtaining this information.
Perform the following steps of the Setup Wizard to configure the basic
connection settings of the Wireless 54Mbps ADSL Router.
1. Launch a Web browser. In the location or address line of your Web
browser, type http://192.168.2.1 to access the Web User Interface. By
default, there is no password, so click LOGIN to access the Web User
Interface.
Note: If you are prompted to connect to the Internet, you may need to
select Try Again or Connect, depending on your Internet browser.
2. Select your country and click Apply. Verify you have selected the correct
country and click OK.
3. The Web User Interface will open and the Setup Wizard will begin. Click
NEXT.
English
3