Herunterladen Inhalt Inhalt Diese Seite drucken

Precise Polar Alignment; Motion Range In Mount - CGX CELESTRON 91530 Bedienungsanleitung

Teleskope mit äquatorialer montierung
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 59

Precise Polar Alignment

Celestron's All-Star Polar Alignment allows you to precisely
polar align your mount without using Polaris or a polar axis
finder This software-assisted polar alignment allows you to
choose a convenient star
Prerequisite: The CGX must be aligned with a Two Star,
One Star, or Solar System Align.
1 Select a suitable bright star from the NexStar hand
control's database Slew the telescope to the star
2 Press the Align button Select "Polar Align" then "Align
Mount" from the list
3 The telescope will then re-slew to the alignment star and
ask you to center it in the eyepiece in order to "sync" on
the star
4 Press Align and the telescope will slew to the position
that the star should be if it were accurately polar-aligned
5 Use the mount's altitude and azimuth adjustments to
center the star in the eyepiece Do not use the direction
keys on the hand control to center the star
6 Press Enter Polar alignment is complete

Motion Range in Mount

Sofware Range
The CGX employs software controlled limit sensors which
detect when the mount has reached near its mechanical
range limit Once the mount reaches the switch, the motor
will decelerate to a stop and a "Limit Switch" warning
message will appear The mount will no longer slew in the
direction of the limit switch until you reverse directions
Mechanical Range
The CGX uses internal cabling so the mount is designed
not to move more than a certain range Both axis are limited
by a hard stop built into the mount This limited range can
also help prevent unintentional interference between your
telescope and the mount or tripod If for any reason the
mount exceeds the software limit switch (or if the clutch is
unlocked and the mount is manually moved), the mount will
halt at the hard stop
R A limit (Figure 9 1) allows you to track 20º past the
meridian If you leave the mount unattended while it's
tracking, it will automatically stop before reaching the
mechanical hard stop
DEC limit (Figure 9 2) contains enough slew range to reach
any portion of the sky
12
| ENGLISH
Figure 9.1 One side of R.A. mechanical limit
Figure 9.2 One side of DEC mechanical limit

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis