CONDTROL IR-CAM 2 Bedienungsanleitung Seite 8

Thermal imager
Emissivity of some materials
Material Emissivity
Asphalt 0.90~0.98
concrete 0.94
cement 0.96
sand 0.90
soil 0.92~0.96
water 0.92~0.96
ice 0.96~0.98
snow 0.83
Glass 0.90~0.95
ceramic 0.90~0.94
Marble 0.94
Gypsum 0.80~0.90
Mortar 0.89~0.91
brick 0.93~0.96
Marking of hot/cold spot temperature
if the function is on, the areas of hottest and coldest temperature will be marked on the
display.
14
IR-CAM 2 CONDTROL
User manual
Material Emissivity
black cloth 0.98
human skin 0.98
bubble 0.75~0.80
charcoal dust 0.96
paint 0.80~0.95
Matte paint 0.97
black rubber 0.94
plastic 0.85~0.95
wood 0.90
paper 0.70~0.94
chromic oxide 0.81
copper oxide 0.78
Ferric oxide 0.78~0.82
texture 0.90
Thermal imager
Elimination of infrared camera noise
put infrared imaging sensor closer to flat surface with homogeneous temperature.
press and hold until you see «adjust» on the display.
lEd light
to turn on/oFF the led light press and hold the trigger.
display modes
use to choose display mode. the product possesses 5 variants of mixing visible
and infrared images.
Image capture and storage
direct the product on the object. press the trigger.
the image and processing settings of the object will be captured. to save the image on memory
card press , to continue taking measures without saving the image press
or the trigger. Micro SD memory card (4 Gb) which is included in the set can store up to 25000
images. if memory card is not installed or full, you will see «NO Sd» or «Full» on the display.
IR-CAM 2 CONDTROL
User manual
15