Problem Solving; Declaration Of Conformity - Hafele 421.68.206 Montageanleitung

14. Problem solving

Problem
TV lift cannot be lowered.
The TV lift does not
respond to the remote
control.
TV lift stops when it is being
raised.
The TV lift cannot be lifted
anymore after a power
failure.

15. Declaration of conformity

Product
Type designation
Manufacturer
The designated product complies with the requirements of the following European
directives:
Machinery directive: EN 13849-1:2008 SRP/CS Cat. B, PL= b,SRESW PL = b
Low voltage directive EN 60335-1:2012, EN 62233:2008, EN 62311:2008
EMC directive: EN 61000-6-1:2007, EN 61000-6-3:2007, EN 55022:2011+A2 Class B
Anton Schneider GmbH & Co KG
Dieter Seeger
Management
2014-01-13
10
Causes
Flat screen TV is skewed.
Remote control receiver
is not connected.
Remote control is not
taught in.
Remote control battery
is empty.
Objects are located on
the furniture flap.
TV lift system powered by an electric motor
TV lift rotating or fixed
421.68.205, 421.68.206, 421.68.215, 421.68.216
Anton Schneider GmbH & Co KG
71131 Jettingen, Germany
Remedies
» Turn the flat screen TV
parallel to the furniture
item.
» See picture 4 on page 26.
» See page 28.
» Replace battery.
» Remove all objects from
the furniture flap.
» Perform a reset,
see page 29.