D10341D
Installation
Removing the plastic frame of the exhaust head
The 368202 plastic frame of the 4300 exhaust head is removed by carefully by
pulling the plastic strips on both sides of the plastic frame outward while pulling the
plastic frame out of the exhaust head.
Fixing the hoses on the exhaust head
Fix the combustion gas and intake air hoses firmly on the exhaust head using the
hose clamps supplied with the accessory pack. Note the connection points of the
hoses on the exhaust head; the intake air hose is installed on the reduced hose
fitting on the 4300 exhaust head, while the combustion gas hose is fitted on Ø 28
mm hose fitting.
The combustion gas hoses must be made of stainless steel.
Install the combustion gas ex-
haust hose to this hose fitting
Note the connection points of the hoses on the exhaust head; the
intake air hose is installed on the reduced hose fitting on the 4300 ex-
haust head, while the combustion gas hose is fitted on Ø 28 mm hose
fitting.
XC Duo
Install the combustion air intake
hose to this hose fitting
- 58 -
en
490541G