Fitting On The Mare; Fitting Under The Halter - Kerbl EquiAlarm Bedienungsanweisung

9. Fitting on the mare

In order to be able to use the EquiAlarm in a girth or under the halter, it must be secured in the supplied holder. You
can do this as follows:
• Slide the EquiAlarm into the holder carefully, as shown in the photo below.
• Make sure that both indicators are visible on the side.
• Next, close the flap using the clip provided.

9.1 Fitting under the halter

If you wish to use the EquiAlarm under a halter, it
should be fitted as shown below, using 3 cable
ties.
33