Programming Telephone Numbers - Kerbl EquiAlarm Bedienungsanweisung

7.2 Programming telephone numbers

• A ctivate the EquiAlarm's "Programming mode" (see 7.1). Wait until the Status indicator is flashing 1 x blue,
1 x green alternatingly.
• Now call the EquiAlarm with your (preferably mobile) telephone.
• The EquiAlarm will now receive your call and programme your telephone number in the memory.
• T he EquiAlarm will now call you back to confirm the number. Allow your telephone ring out (i.e. do not answer
and do not divert).
You are now in fact finished with programming. The EquiAlarm now knows your number
and will call you when the birth is occurring. Now wait 2-3 minutes. The EquiAlarm will
automatically exit programming mode. The EquiAlarm is now ready for use.
Should you wish to pre-programme a second number, please follow the steps below.
• Wait until the EquiAlarm is flashing 1 x blue, 2x green.
• Now call the EquiAlarm with the 2nd telephone you wish to be called on (this may also be a landline telephone).
• The EquiAlarm will also receive this call and will programme your telephone number in the memory.
• T he EquiAlarm will also call you on this telephone to confirm the number. Allow your telephone to ring out and do
not respond.
Fig2: status indicator light patterns during programming
LED light pattern
You can determine which number you are programming by the number of green flashes on
the EquiAlarm. For instance 1x blue and 2x green means that you are programming the
second telephone number.
Meaning
The EquiAlarm is ready for the first call
The EquiAlarm is ready for the second call
30