sedus netwin Bedienungsanleitung Seite 3

ne tw in
Instructions for use
Congratulations! You have chosen a high-quality Sedus product. We hope you enjoy
your netwin office swivel chair.
Please read the following information on adjusting the chair properly so that you can
enjoy all the ergonomic advantages netwin has to offer.
A Height of the seat
®
Lowering the seat:
(the seat will drop slowly)
will lock the position
®
Raising the seat:
rise slowly)
position
B Height of the lumbar support
®
Adjusting the height:
2.
C Angle of the backrest
®
Adjusting the backrest dynamically:
release it
®
Locking the backrest into position:
reaches the desired angle
lock the backrest into position
D Strength of the backrest pressure
®
1.
on the seat and backrest
downwards until the desired position is achieved (greater backrest
pressure) or upwards (lesser backrest pressure)
E Depth of the seat (optional)
®
1.
desired position
F Seat angle (optional)
®
1.
4° forwards) or swivel downwards and lock into place (seat moves back
into its original position)
G Adjusting the basic armrests (optional)
®
Height:
armrest
®
Adjustable seat width:
key (TX40)
H Adjusting the 3D armrests (optional)
®
Height:
button to engage the armrest
®
Depth: Push the armrest cover backwards or forwards to engage
®
Swivelling armrest covers: up to 15° inwards and outwards; also swivels
360°with more force; a 180°turn changes the width between the armrests
®
Adjustable seat width:
key (TX40)
The functions of the swivel chair
G
C
1.
Releasing the lever at the desired height will lock the
3.
Adjust the handles on both sides to the desired height
Lean against the backrest
2.
Adjusting the backrest dynamically (C)
Press the finger plate and hold it fast
3.
Stand up Swivel the lever backwards and lock into place (chair tilts
2.
Press the button underneath the armrest, lift or lower the
1.
Release the button, the armrest locks into place
2.
Position the armrests
2.
Press the button, lift or lower the armrest
1.
Position the armrests
2.
B
F
Sit down on the seat
1.
Releasing the lever at the desired height
3.
Stand up Pull the lever upwards (the seat will
2.
Do not lean against the backrest
1.
Press the lever down and release it to
2.
Crank the quick adjustment mechanism
3.
Release the finger plate, and the seat will engage
Loosen the screws slightly with a Torx
1.
Loosen the screws slightly with a Torx
1.
Pull the lever upwards
2.
Pull the lever upwards and
1.
The backrest is free-flowing
3.
Lean back until the backrest
1.
Exert only slight pressure
2.
Push the cushion to the
2.
Retighten the screws
3.
Retighten the screws
3.
H
B
Release the
2.
E
A
D