Operating Range - Lindam clarity LD167 Bedienungsanleitung

TESTING THE CONNECTION
Place the parent and baby unit in the same room to test the connection.
Make sure the baby unit is at least 1 metre from the parent unit, otherwise you may experience audio feedback.
Switch on both units. The link light on the parent unit will turn green once a link is established. If no link is found the Link light
will flash and stay red.
LINK RESETTING PROCEDURE
Sometimes the link between the Parent Unit and Baby Unit can be lost if there is disruption between the units. If this happens
first check the power adapters are connected and the batteries are sufficiently charged. Also test the connection by following
the procedure as described above. If you still experience link problems this can be corrected by following this reset procedure.
1 Simultaneously press and hold the VOX button on the Parent Unit and the Night Light Button on the Baby Unit for 5 seconds.
'Searching for signal' will appear on the Parent Unit screen.
2 Once the 2 units are linked the Parent Unit screen will start to function as normal

OPERATING RANGE

The operating range of the Lindam Video monitor is 150m in open air. This distance may be reduced when inside the home
for example a brick wall could reduce the range by between 10% and 50%.
OUT OF RANGE ALERT
If the link between the parent and nursery unit is lost then and audio alarm will sound and 'Out of range' will be displayed on
the parent unit screen. The Link light will also flash red.
8