Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting - Lindam clarity LD167 Bedienungsanleitung

Digital video monitor
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 34

TROUBLESHOOTING

If you are unable to receive a signal
• Make sure both the camera and monitor are switched on
• If using Mains Power ensure the plug is pushed all the way into the socket.
• If using batteries ensure they are not empty
If the signal is poor
• If there is a microwave oven in the signal path, move the microwave or switch it off.
• Make sure the Units are within range of each other (150 metres / 492 ft). Please be aware that walls and other large objects
can reduce the transmission range.
For link problems please refer back to the 'link resetting procedure' section earlier in this booklet.
WARNINGS
• Keep the camera lens clean using a soft dry cloth and avoid touching the lens with your fingers.
• This monitor is not a substitute for direct adult supervision. Check in on your child regularly.
• Keep all parts and accessories out of young children's reach.
• Do not store or operate in damp, dusty or dirty areas.
• Do not expose to heat or mount the camera above a heat source.
• Do not store in cold areas. Condensation may form as the units warm back up.
• There are no user serviceable parts. Do not attempt to open your monitor's casings.
• Avoid dropping your monitors.
• Do not use any Mains Power Adapters other than those supplied with your monitor.
• Do not use an extension cord with your Power Adapters
• Do not overload electrical outlets or extension cords as there is a risk of fire or electric shocks.
• Remember you are using public airwaves and there is a small risk that the sound and vision transmitted could be received
by other 2.4 GHz devices. To protect privacy turn the camera off when not in use.
• Do not leave exhausted batteries in your monitors. They may leak and cause corrosion.
• Dispose of exhausted batteries safely and never dispose of them in a fire.
• Never immerse any part of the baby monitor in water or any other liquid.
• Power cords should be routed so that they are not likely to be walked on or pinched.
• Only use the charger and adapter supplied. The use of third party adapters may damage your monitor.
• Your Parent Unit camera should only be mounted as instructed using the correct mounting attachment.
• Only replace rechargeable batteries with those recommended by Lindam.
• Never cover the Units with anything when in use.
• Never place the Baby Unit inside the baby's bed or cot.
• Do not place either Unit in direct sunlight.
• Retain these instructions for future reference.
WARNING: STRANGULATION HAZARD!-Keep out of reach of children. Do not use with extension cords.
11

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Verwandte Produkte für Lindam clarity LD167

Inhaltsverzeichnis