BRIO Pilo Bedienungsanleitung

BRIO Pilo - New instructions
Group 1 and 2, 15-36 kg (app. 4 -12 yrs)
GB Child safety car seat BRIO Pilo
BRIO Pilo is a completely new child safety
car seat with a practical carrying strap which
makes it easy to take to preschool, the
cinema, to see friends, etc. At the same time,
it is very easy to store and stow out of the
way. The child safety car seat can be used
in the front and the back seat for children
weighing between 15 and 36 kg. It has
been approved in correspondence with ECE
R44/04 UNIVERSAL, which indicates that it
can be used appropriately in all seating areas
in a vehicle equipped with 3 point harness
belts. Read the instructions before using the
product. If you have questions or doubts,
contact the manufacturer or the retailer of
the product.
Important
• Place the child safety car seat on the car
seat such that its backside lies against the
seat's back support.
36845
PiloBrschyr2_2.indd 1
• Place the child on the child safety car seat.
Thread the car's 3-point belt through the
plastic device on the BRIO Pilo's belt guide
(see illustration under the cushion). Adjust
the length of the belt guide to ensure that
the diagonal seatbelt sits correctly against
the child's shoulder. Pull the diagonal and
horizontal seatbelt over the child and click
the belt into the belt buckle.
• Make sure that the diagonal seatbelt runs
over the arm rest and the waist belt fits
under the arm rests of the child safety car
seat.
• Ensure that the child is sitting comfortably
with his/her back leaning against the back
support of the car seat. Adjust the seatbelt
to ensure that it is comfortably tightened
in the right position.
Warning
• Read the entire instruction manual
because an incorrect placement of the
15/7/09 14:00:13