Philips SalonDry Control HP4983 Bedienungsanleitung Seite 12

EnglisH
1
Problem Solution
The appliance may have overheated and switched
itself off. Unplug the appliance and let it cool down
for a few minutes. Before you switch on the
appliance again, check the grilles to make sure they
are not blocked by fluff, hair, etc.
The appliance may not be suitable for the voltage to
which it has been connected. Make sure that the
voltage indicated on the type plate of the appliance
corresponds to the local mains voltage.
The mains cord of the appliance may be damaged. If
the mains cord is damaged, you must have it
replaced by Philips, a service centre authorised by
Philips or similarly qualified persons in order to avoid
a hazard.