Using The Appliance - Gorenje B800HC Gebrauchsanweisung

5. Don't let cord hang over edge of table or counter,
do not let cord contact hot surface, including the
stove.
6. Never use accessories or parts made by other
manufactures not recommended or sold; may
cause a risk of injury to persons.
7. Do not use the appliance if it's power cord, plug,
blade device or other part is damaged. In the event
of any damage to the power cord or blade device
of this product, it can only be replaced with a
special one for use with this product or Gorenje
special servicing agency.
8. Do not place hands in the jar while the appliance is
operating.
9. Do not remove the jar or grinding cup from the
base when the appliance is in operation.
10. Make sure all parts are correctly mounted before
you switch on the appliance.
11. Make sure the motor and blade have completely
stopped before disassembling and cleaning.
12. Avoid touching the sharp blades, especially when
the appliance is plugged in.
13. Don't immerse the motor base, plug or cord in
water or any other liquid.
14. This appliance can be used by children aged from
8 years and persons with reduced physical,
sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and understand the
hazards involved.
15. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by
children without supervision.
16. Switch off the appliance and disconnect from
supply before changing accessories or
approaching parts that move in use.
17. Please follow the above safety precautions
This appliance is marked according to the
European directive 2012/19/EU on Waste
Electrical and Electronic Equipment
(WEEE). This guideline is the frame of a
European-wide validity of return and
recycling on Waste Electrical and
Electronic Equipment.

Using the appliance

Preparing for use:
1. Wash all detachable parts (see chapter cleaning)
2. Be sure all parts are properly assembled and in
place before use.
3. The temperature for the food to be mixed shall not
exceed 60℃, the volume of food to be processed
shall not exceed the maximum mark level on the
jar.
USING BLENDER:
1. Install the jar sealing ring over the blending blade
assembly.
2. Install the blending blade assembly over the jar
base.
3. Attach the jar base to the jar by turning it in the
direction of the arrow.
4. Put the ingredients that are not bigger than 2
centimeter in the jar.
5. Press the lid into place.
6. Install the jar onto the base.
Tips: While the motor is running, if you want to add
ingredients you can:
I:Turn the inner lid off the lid in the direction of
anticlockwise
II. Add the ingredients into the jar through the
opening in the lid
20