Blower Operation; Transporting The Blower - Makita EB5300TH Handbuch

► 1. Clamp screw
Adjust the angle of the control arm.
► 1. Control arm

Blower Operation

1. While operating the blower, adjust the throttle trig-
ger / throttle lever so that the wind force is appropriate
for the work location and conditions.
2. Adjusting engine speed.
For tube throttle model: Engine speed increases
by pulling the throttle trigger. To decrease the engine
speed, loosen the throttle trigger.
The cruise control function allows the operator to main-
tain a constant engine speed without pulling the trigger
lever. To increase the engine speed, turn the stop con-
trol lever to high speed. To decrease the engine speed,
turn the stop control lever to low speed.
1
► 1. Throttle trigger 2. Stop control lever
For hip throttle model: To increase the engine speed,
turn the throttle lever to high speed. To decrease the
engine speed, turn the throttle lever to low speed.
1
► 1. Throttle lever

Transporting the blower

CAUTION:
sure to stop the engine.
NOTICE:
a heavy object on it. It may damage the machine.
NOTICE:
position whenever transporting or storing.
Transporting or storing in a position that is not upright
may cause oil to spill inside the blower engine. This
may result in oil leaks and white smoke from burning
oil, and the air cleaner may become dirty with oil.
NOTICE:
ing. Otherwise the blower housing may be damaged.
MAINTENANCE
CAUTION:
nance, stop the engine and allow it to cool down.
Remove the spark plug and plug cap. Otherwise
the operator may suffer burn or serious injury due to
an accidental start-up.
CAUTION:
nance, make sure that all parts are assembled.
15 ENGLISH
2
1
When transporting the blower, be
Do not sit or stand on the blower or put
Maintain the blower in an upright
Do not drag the blower when transport-
Before inspection and mainte-
After inspection and mainte-
1