Setting The Master Code - AmazonBasics B00UG9HB1Q Bedienungsanleitung

Setting the master code

Use the master code to enter your safe if you forget your User Code.
1. With the door open, press 0, 0, then press the Reset button.
2. Input the new code (3-8 digits), then press # to confi rm. The
new master code is set.
NOTE: If the (confi rm) light doesn't turn on, your new code isn't set. Repeat these steps.
Opening your safe – after the first time
1. Input your user code (3 to 8 digits) on the keypad. Press # to confi rm.
2. The confi rm light turns on.
3. Rotate the knob clockwise, then open the door.
NOTE: The preset user code is "159".
Locking the safe
Close the door, then turn the knob counterclockwise to lock it.
6
(confi rm) light turns on and your