Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1 Foreword
Congratulations!
You have purchased a high-quality solar module from SunWare
S
olartechnik and thus have opted for the highest quality
Germany".
T
o enable you to enjoy your new solar module for as long s
possible, please read the following information carefully.
If this does not answer any queries you may have sufficiently,
please contact your specialist dealer in the first instance.
O
f course, we are also very happy to help as much as we an.
Direct information is available at www.sunware.de
Pack
age
content (Pic
ture 1
):
1 x
R
X solar
panel
1 x
Charge Controller FOX-062
1 x
Instruction manual
1 x
Instruction manual
For modules with more than one wing:
1 x
Solar
panel
bag with carry handle
9
"M
ade in
a
c
RX Solar Panels
FOX-062
2 Important information
This user manual provides important safety instructions that you
should read carefully and follow. Please retain your original invoice
and the original packaging at least for the period of the warranty.
Further information:
- for optimum performance avoid partial shading where possible
- fold
able
modules as RX-21052 both panels are in series
connected. For optimal performance, both parties should be as
equal as possible aligned to the sun.
- with multi-wing RX modules each wing operates as an
independent module (recognizable by the large cable outlet on
each wing)
- protect
the
module surface from cutting damage
never
-
carry, pull or fix the RX module by the connection cable
- always fold RX modules with cells protected on the inside
never
- when stowing
,
place the cable plug
Æ
risk of cell breakage
- always fasten RX modules
NOT
- do
cut or drill through
Æ
panel
loss of warranty
NOT
- RX modules must
be walked on even if placed on a rigid
base
NOT
- RX modules must
be bent
- RX modules must always be folded along the textile joints
Picture 1, Point 5
(
)
NOT
- RX modules are
suitable for permanent installation on
motor vehicles
- permissible bending 3cm/1m module length (see below)
Panel length of 1m
Solar panels can be bent a maximum of 3%
,
,
in between the wings
only
at the textile edges
the base plate or the
laminate
of the
maximal 3cm
E
10
Werbung
Inhaltsverzeichnis
