General Safety Rules; Additional Safety Rules For Mitre Saws - REXON SM 3051AL Bedienungsanleitung

General Safety Rules

WARNING ! When using electric tools basic safety
precautions should always be followed to reduce the risk
of fire, electric shock and personal injury.
Read all these instructions before attempting to
operate your product. Save these instructions for future
reference.
1. Keep work area clear. Cluttered areas and benches invite
injuries.
2. Consider work area environment. Do not expose tools to
rain. Do not use tools in damp or wet locations. Keep work
area well lit. Do not use tools in the presence of flammable
liquids or gases.
3. Guard against electric shock. Avoid body contact with
earthed or grounded surfaces.
4. Keep other people away. Do not let others, especially
children, not involved in the work touch the tool or the
extension lead and keep them away from the work area.
5. Store idle tools. When not in use, tools should be stored in a
dry locked-up place, out of reach of children.
6. Do not force the tool. It will do the job better and safer at
the rate for which it was intended.
7. Use the right tool. Do not force small tools to do the job of a
heavy duty tool. Do not use tools for purposes not intended;
for example do not use circular saws to cut tree limbs or logs.
8. Dress properly. Do not wear loose clothing or jewellery,
they can be caught in moving parts. Non-skid footwear is
recommended when working outdoors. Wear protective hair
covering to contain long hair.
9. Use protective equipment. Use safety glasses. Use face or
dust mask if cutting operations create dust.
10. Connect dust extraction equipment. If devices are
provided for the connection of dust extraction and collecting
equipment, ensure these are connected and properly used.
11. Do not abuse the cable. Never pull the cable to disconnect it
from the socket. Keep the cord away from heat, oil and sharp
edge.
12. Secure work. Where possible use clamps or a vise to hold
the work. It's safer than using your hand.
13. Don't overreach. Keep proper footing and balance at all
time.
14. Maintain tools with care. Keep cutting tools sharp and
clean for better and safer performance. Follow instructions
for lubricating and changing accessories. Inspect tool
cords periodically and if damaged have them repaired
by an authorized service facility. Inspect extension cords
periodically and replace if damaged. Keep handles dry, clean
and free from oil and grease.
15. Disconnect tools. When not in use, before servicing and
when changing accessories such as blades, bits, cutters,
disconnect tools from the power supply.
16. Remove adjusting keys and wrenches. Form the habit
of checking to see that keys and adjusting wrenches are
removed from the tool before turning it on.
17. Avoid unintentional starting. Ensure switch is in "off"
position when plugging in.
18. Use outdoor extension leads. When the tool is used
outdoors, use only extension leads intended for outdoor use
and so marked.
19. Stay alert. Watch what you are doing, use common sense
and do not operate the tool when you are tired.
20. Check damaged parts. Before further use of the tool, it
should be carefully checked to determine that it will operate
properly and perform its intended function. Check the
alignment of moving parts, binding of moving parts, breakage
of parts, mounting and any other conditions that may affect
its operation. A guard or other part that is damaged should be
properly repaired or replaced by an authorized service centre
unless otherwise indicated in this instruction manual. Do not
use the tool if the switch does not turn it on and off.
21. WARNING. The use of any accessory or attachment other
than one recommended in this instruction manual may
present a risk of personal injury.
22. Have your tool repaired by a qualified person. This electric
tool complies with the relevant safety rules. Repairs should
only be carried out by a qualified person using original spare
parts, otherwise this may result in considerable danger to the
user.
Additional Safety Rules for
Mitre Saws
1. This saw is recommended for cutting wood only.
2. Never use a saw blade which is not recommend in this owner'
s manual.
3. Do not use saw blades with High speed steel (HSS) or
damaged or deformed.
4. Do not use the saw without guards in position, in good
working order and properly maintained.
5. Replace the table insert when worn.
6. Use only saw blades recommended by the manufacturer
and which conforms to EN847-1.
7. Connect your mitre saw to a dust collecting device
(I. D.Ø32mm) when sawing.
8. Select saw blades in relation to the material to be cut.
9. Check the maximum depth of cut.
10. When sawing long work pieces, always use extra support to
provide better support, and use clamps or other
clamping devices.
11. Wear suitable personal protective equipment when
necessary, this could include:
- hearing protection to reduce the risk of induced hearing
loss;
- eye protection;
- respiratory protection to reduce the risk of inhalation of
harmful dust;
- gloves for handling saw blades (saw blades shall be carried
in a holder wherever practicable) and rough material.
WARNING!
• Ensure that the arm is securely fixed when bevelling.
• Keep the floor area around the machine level, well
maintained and free of loose materials e.g. chips and
cut-offs.
• Use correctly sharpened saw blades. Observe the
maximum speed marked on the saw blade.
• When fitted with laser, no exchange with different type
of laser is permitted. Repairs shall only be carried out by
the laser manufacturer or an authorised agent.
• Refrain from removing any cut-offs or other parts of the
workpiece from the cutting area whilst the machine is
running and the saw head is not in the rest position.
• Ensure that the machine is always fixed to a bench,
whenever possible.
12. The operator is adequately trained in the use adjustment and
operation and operation of the machine.
13. Provide for adequate room lighting at your workplace or for
adequate lighting of the immediate work area.
14. When fitted with laser no exchange with different type of laser
is permitted. Repairs shall only be carried out by the laser
manfacturer or an authorized agent.
15. Refrain from removing any cut-offs or other parts of the
workpiece from the cutting area whilst the machine is running
and the saw head is not the rest position.
16. Never stand on this tool. Serious injuries could occur when
this tool tips over or when coming in contact with the saw
blade.
17. Never use the mitre saw near flammable liquids, vapors, or
gases.
18. Remove all nails that may be in the workpiece to prevent
sparking that could cause a fire.
19. To avoid fire or toxic reaction, never use gasoline, naphtha
acetone, lacquer thinner or similar highly volatile solvents to
clean the mitre saw.
20. Keep the saw with proper footing on a table to decrease noise
and vibration.
21. Always use the designated carrying handle for transportation.
SYMBOLS
V .............volts
Hz... ........hertz
min ..........minutes
h .............hours
I ............. ON
min -1 .......revolutions per minute
Wear safety goggles
Wear ear protection
Wear a breathing mask
1
A ............amperes
W............watts
~..............alternating current
............Class II Construction
O ........... OFF